Attaching Twist Lock Knob
Beach Cart-Folding and Beach Cart Folding-Mini with 1/2 inch
Stainless Steel axles use wheels with Twist Lock Knobs.
To attach/re-attach the Twist Lock Knob, follow this procedure:
The Wire Lock Pin will slide through the bushing slots.
(Slots in bushing shown in photo.)
Insert the Wire Lock Pin on the Twist Lock Knob as shown.
Don't insert too far to allow clearance for the bushing.
Align the Twist Lock Knob and bushing slots as shown.
"A" and "B" should align as shown in the above photo.
With the pin "started" on the knob, place Twist Lock Knob on the
bushing, being sure it's lined up as in the previous photo.
Push the Wire Lock Pin through slots to engage.
You will hear/feel a click as the Wire Lock Pin seats under the
Twist Lock Knob.
No need to twist the Twist Lock Knob when mounting the wheel to the
axle.
To remove wheel from axle, twist the Twist Lock Knob only 1/4 turn
and pull wheel off.
Twist only 1/4 turn. If you twist too much, the
Wire Lock Pin may pop off the Twist Lock Knob.
|
